Geant4 10.7.0
Toolkit for the simulation of the passage of particles through matter
Loading...
Searching...
No Matches
G4CompositeEMDataSet.cc
Go to the documentation of this file.
1//
2// ********************************************************************
3// * License and Disclaimer *
4// * *
5// * The Geant4 software is copyright of the Copyright Holders of *
6// * the Geant4 Collaboration. It is provided under the terms and *
7// * conditions of the Geant4 Software License, included in the file *
8// * LICENSE and available at http://cern.ch/geant4/license . These *
9// * include a list of copyright holders. *
10// * *
11// * Neither the authors of this software system, nor their employing *
12// * institutes,nor the agencies providing financial support for this *
13// * work make any representation or warranty, express or implied, *
14// * regarding this software system or assume any liability for its *
15// * use. Please see the license in the file LICENSE and URL above *
16// * for the full disclaimer and the limitation of liability. *
17// * *
18// * This code implementation is the result of the scientific and *
19// * technical work of the GEANT4 collaboration. *
20// * By using, copying, modifying or distributing the software (or *
21// * any work based on the software) you agree to acknowledge its *
22// * use in resulting scientific publications, and indicate your *
23// * acceptance of all terms of the Geant4 Software license. *
24// ********************************************************************
25//
26//
27//
28// Author: Maria Grazia Pia ([email protected])
29//
30// History:
31// -----------
32// 1 Aug 2001 MGP Created
33//
34// 15 Jul 2009 Nicolas A. Karakatsanis
35//
36// - LoadNonLogData method was created to load only the non-logarithmic data from G4EMLOW
37// dataset. It is essentially performing the data loading operations as in the past.
38//
39// - LoadData method was revised in order to calculate the logarithmic values of the data
40// It retrieves the data values from the G4EMLOW data files but, then, calculates the
41// respective log values and loads them to seperate data structures.
42//
43// - SetLogEnergiesData method was cretaed to set logarithmic values to G4 data vectors.
44// The EM data sets, initialized this way, contain both non-log and log values.
45// These initialized data sets can enhance the computing performance of data interpolation
46// operations
47//
48// -------------------------------------------------------------------
49
51#include "G4EMDataSet.hh"
53#include <fstream>
54#include <sstream>
55
57 G4double argUnitEnergies,
58 G4double argUnitData,
59 G4int argMinZ,
60 G4int argMaxZ)
61 :
62 algorithm(argAlgorithm),
63 unitEnergies(argUnitEnergies),
64 unitData(argUnitData),
65 minZ(argMinZ),
66 maxZ(argMaxZ)
67{
68 if (algorithm == 0)
69 G4Exception("G4CompositeEMDataSet::G4CompositeEMDataSet",
70 "em1003",FatalException,"interpolation == 0");
71
72}
73
74
75
77{
78 CleanUpComponents();
79 if (algorithm) delete algorithm;
80}
81
82
84{
85 const G4VEMDataSet* component(GetComponent(argComponentId));
86
87 if (component) return component->FindValue(argEnergy);
88
89 std::ostringstream message;
90 message << "G4CompositeEMDataSet::FindValue - component " << argComponentId << " not found";
91
92 G4Exception("G4CompositeEMDataSet::FindValue",
93 "em1004",FatalException,message.str().c_str());
94
95 return 0.;
96}
97
99{
100 const size_t n(NumberOfComponents());
101
102 G4cout << "The data set has " << n << " components" << G4endl;
103 G4cout << G4endl;
104
105 size_t i(0);
106
107 while (i<n)
108 {
109 G4cout << "--- Component " << i << " ---" << G4endl;
111 i++;
112 }
113}
114
115void G4CompositeEMDataSet::SetEnergiesData(G4DataVector* argEnergies, G4DataVector* argData, G4int argComponentId)
116{
117 G4VEMDataSet * component(components[argComponentId]);
118
119 if (component)
120 {
121 component->SetEnergiesData(argEnergies, argData, 0);
122 return;
123 }
124
125 std::ostringstream message;
126 message << "G4CompositeEMDataSet::SetEnergiesData - component " << argComponentId << " not found";
127
128 G4Exception("G4CompositeEMDataSet::SetEnergiesData",
129 "em1004",FatalException,message.str().c_str());
130}
131
133 G4DataVector* argData,
134 G4DataVector* argLogEnergies,
135 G4DataVector* argLogData,
136 G4int argComponentId)
137{
138 G4VEMDataSet * component(components[argComponentId]);
139
140 if (component)
141 {
142 component->SetLogEnergiesData(argEnergies, argData, argLogEnergies, argLogData, 0);
143 return;
144 }
145
146 std::ostringstream message;
147 message << "G4CompositeEMDataSet::SetEnergiesData - component " << argComponentId << " not found";
148
149 G4Exception("G4CompositeEMDataSet::SetLogEnergiesData",
150 "em1004",FatalException,message.str().c_str());
151}
152
153
155{
156 CleanUpComponents();
157
158 for (G4int z(minZ); z<maxZ; z++)
159 {
160 G4VEMDataSet* component = new G4EMDataSet(z, algorithm->Clone(), unitEnergies, unitData);
161 if (!component->LoadData(argFileName))
162 {
163 delete component;
164 return false;
165 }
166 AddComponent(component);
167 }
168 return true;
169}
170
171
173{
174 CleanUpComponents();
175
176 for (G4int z(minZ); z<maxZ; z++)
177 {
178 G4VEMDataSet* component = new G4EMDataSet(z, algorithm->Clone(), unitEnergies, unitData);
179 if (!component->LoadNonLogData(argFileName))
180 {
181 delete component;
182 return false;
183 }
184 AddComponent(component);
185 }
186 return true;
187}
188
189
191{
192 for (G4int z=minZ; z<maxZ; z++)
193 {
194 const G4VEMDataSet* component(GetComponent(z-minZ));
195
196 if (!component)
197 {
198 std::ostringstream message;
199 message << "G4CompositeEMDataSet::SaveData - component " << (z-minZ) << " not found";
200 G4Exception("G4CompositeEMDataSet::SaveData",
201 "em1004",FatalException,message.str().c_str());
202 return false;
203 }
204
205 if (!component->SaveData(argFileName))
206 return false;
207 }
208
209 return true;
210}
211
212void G4CompositeEMDataSet::CleanUpComponents(void)
213{
214 while (!components.empty())
215 {
216 if (components.back())
217 delete components.back();
218 components.pop_back();
219 }
220}
221
222
224{
225 G4double value = 0.;
226 if (componentId >= 0 && componentId < (G4int)components.size())
227 {
228 const G4VEMDataSet* dataSet = GetComponent(componentId);
229 value = dataSet->RandomSelect();
230 }
231 return value;
232}
@ FatalException
void G4Exception(const char *originOfException, const char *exceptionCode, G4ExceptionSeverity severity, const char *description)
Definition: G4Exception.cc:35
double G4double
Definition: G4Types.hh:83
bool G4bool
Definition: G4Types.hh:86
int G4int
Definition: G4Types.hh:85
#define G4endl
Definition: G4ios.hh:57
G4GLOB_DLL std::ostream G4cout
virtual void PrintData(void) const
virtual G4double RandomSelect(G4int componentId) const
virtual size_t NumberOfComponents() const
virtual void SetEnergiesData(G4DataVector *x, G4DataVector *data, G4int componentId)
virtual void AddComponent(G4VEMDataSet *dataSet)
virtual G4double FindValue(G4double x, G4int componentId=0) const
virtual void SetLogEnergiesData(G4DataVector *xData, G4DataVector *data, G4DataVector *xLogData, G4DataVector *Logdata, G4int componentId)
G4CompositeEMDataSet(G4VDataSetAlgorithm *argAlgorithm, G4double eUnit=CLHEP::MeV, G4double dataUnit=CLHEP::barn, G4int zMin=1, G4int zMax=99)
virtual const G4VEMDataSet * GetComponent(G4int componentId) const
virtual G4bool LoadNonLogData(const G4String &fileName)
virtual G4bool LoadData(const G4String &fileName)
virtual G4bool SaveData(const G4String &fileName) const
virtual G4VDataSetAlgorithm * Clone() const =0
virtual G4bool SaveData(const G4String &fileName) const =0
virtual void SetEnergiesData(G4DataVector *x, G4DataVector *data, G4int component=0)=0
virtual G4bool LoadNonLogData(const G4String &fileName)=0
virtual G4double RandomSelect(G4int componentId=0) const =0
virtual void SetLogEnergiesData(G4DataVector *x, G4DataVector *data, G4DataVector *Log_x, G4DataVector *Log_data, G4int component=0)=0
virtual G4double FindValue(G4double x, G4int componentId=0) const =0
virtual G4bool LoadData(const G4String &fileName)=0
virtual void PrintData(void) const =0