EmcRawDataProvider Class Reference

#include <EmcRawDataProvider.h>

Inheritance diagram for EmcRawDataProvider:

Public Types
enum	EmcDataMode {   DropLow = BIT(0) , DropFull = BIT(1) , DropHot = BIT(2) , DropDead = BIT(3) ,   CutTime = BIT(4) , DoCalib = BIT(5) , DoOther = BIT(6) , Redo = BIT(7) }

Public Member Functions
	EmcRawDataProvider ()
	EmcRawDataProvider (const char *name, uint32_t adclow=0, uint32_t tlow=0, uint32_t thigh=60)
	EmcRawDataProvider (const char *name, std::vector< uint32_t > &hot, std::vector< uint32_t > &dead, uint32_t elow=0, uint32_t tlow=0, uint32_t thigh=60)
virtual	~EmcRawDataProvider ()
void	handle (const Incident &)
virtual StatusCode	initialize (bool mode=0, ISvcLocator *svcLoc=0, IMessageSvc *pMsg=0)
EmcDigiCol &	getEmcDigiVec (uint32_t control)
bool	isGoodEmcDigi (uint32_t control, uint32_t id, uint32_t measure, uint32_t adc, uint32_t tdc)
bool	isGoodEmcDigi (uint32_t control, EmcDigi *emcDigi)
void	doCalib (Identifier &id, uint32_t &measure, uint32_t &adc)
void	doCalib (EmcDigi *emcDigi)
void	setELowThreshold (const uint32_t low)
void	setTLowThreshold (const uint32_t low)
void	setTHighThreshold (const uint32_t high)
void	setHotCrystals (const std::vector< uint32_t > &idVec)
void	addHotCrystal (const uint32_t id)
void	setDeadCrystals (const std::vector< uint32_t > &idVec)
void	addDeadCrystal (const uint32_t id)
bool	removeHotCrystal (const uint32_t id)
bool	removeDeadCrystal (const uint32_t id)
uint32_t	getAdcLowThreshold ()
uint32_t	getTdcLowThreshold ()
uint32_t	getTdcHighThreshold ()
std::vector< uint32_t > &	getHotCrystals ()
std::vector< uint32_t > &	getDeadCrystals ()
Public Member Functions inherited from RawDataProviderBase
	RawDataProviderBase (const char *name)
virtual	~RawDataProviderBase ()
StatusCode	initialize (ISvcLocator *svcLoc=0, IMessageSvc *pMsg=0)
void	setSvcLocator (ISvcLocator *svcLoc)
void	setMsgSvc (IMessageSvc *svc)
void	setMsgName (const char *name)

Additional Inherited Members
Protected Member Functions inherited from RawDataProviderBase
	RawDataProviderBase ()
Protected Attributes inherited from RawDataProviderBase
ISvcLocator *	m_svcLocator
IMessageSvc *	m_msgSvc
std::string	m_name

Detailed Description

Definition at line 17 of file EmcRawDataProvider.h.

Member Enumeration Documentation

EmcDataMode

enum EmcRawDataProvider::EmcDataMode

Enumerator
DropLow
DropFull
DropHot
DropDead
CutTime
DoCalib
DoOther
Redo

Definition at line 30 of file EmcRawDataProvider.h.

                  {
    DropLow  = BIT(0),
    DropFull = BIT(1),
    DropHot  = BIT(2),
    DropDead = BIT(3),
    CutTime  = BIT(4),
    DoCalib  = BIT(5),
    DoOther  = BIT(6),
    Redo     = BIT(7)
  };

Constructor & Destructor Documentation

EmcRawDataProvider() [1/3]

EmcRawDataProvider::EmcRawDataProvider

(

)

Definition at line 18 of file EmcRawDataProvider.cxx.

                                      :
  RawDataProviderBase(),
  m_adcLowThreshold(0), m_tLowThreshold(0), m_tHighThreshold(60),
  m_hotCrystals(0), m_deadCrystals(0),
  m_emcDigiVec(){
  m_emcCalibConstSvc=0;
}

EmcRawDataProvider() [2/3]

EmcRawDataProvider::EmcRawDataProvider	(	const char *	name,
		uint32_t	adclow = 0,
		uint32_t	tlow = 0,
		uint32_t	thigh = 60 )

Definition at line 26 of file EmcRawDataProvider.cxx.

                                                                                                    :
  RawDataProviderBase(name),
  m_adcLowThreshold(elow), m_tLowThreshold(tlow), m_tHighThreshold(thigh),
  m_hotCrystals(0), m_deadCrystals(0),
  m_emcDigiVec(){
  m_emcCalibConstSvc=0;
}

EmcRawDataProvider() [3/3]

EmcRawDataProvider::EmcRawDataProvider	(	const char *	name,
		std::vector< uint32_t > &	hot,
		std::vector< uint32_t > &	dead,
		uint32_t	elow = 0,
		uint32_t	tlow = 0,
		uint32_t	thigh = 60 )

Definition at line 34 of file EmcRawDataProvider.cxx.

                                                                    :
  RawDataProviderBase(name),
  m_adcLowThreshold(elow), m_tLowThreshold(tlow), m_tHighThreshold(thigh),
  m_hotCrystals(hot), m_deadCrystals(dead),
  m_emcDigiVec(){
  m_emcCalibConstSvc=0;
}

~EmcRawDataProvider()

virtual EmcRawDataProvider::~EmcRawDataProvider ( )

inlinevirtual

Definition at line 23 of file EmcRawDataProvider.h.

{m_emcDigiVec=EmcDigiCol();};

Member Function Documentation

addDeadCrystal()

void EmcRawDataProvider::addDeadCrystal

(

const uint32_t

id

)

Definition at line 220 of file EmcRawDataProvider.cxx.

                                                    {
  std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
  for(;it!=m_deadCrystals.end();it++){
    if((*it)==teid) break;
  }
  if(it==m_deadCrystals.end()) m_deadCrystals.push_back(teid);
  
  return;
}

addHotCrystal()

void EmcRawDataProvider::addHotCrystal

(

const uint32_t

id

)

Definition at line 210 of file EmcRawDataProvider.cxx.

                                                   {
  std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
  for(;it!=m_hotCrystals.end();it++){
    if((*it)==teid) break;
  }
  if(it==m_hotCrystals.end()) m_hotCrystals.push_back(teid);
 
  return;
}

doCalib() [1/2]

void EmcRawDataProvider::doCalib

(

EmcDigi *

emcDigi

)

Definition at line 131 of file EmcRawDataProvider.cxx.

                                                {
  Identifier id=emcDigi->identify();
  uint32_t adc=emcDigi->getChargeChannel();
  uint32_t measure=emcDigi->getMeasure();
  doCalib(id,measure,adc);
  emcDigi->setChargeChannel(adc);
  emcDigi->setMeasure(measure);
}

doCalib() [2/2]

void EmcRawDataProvider::doCalib	(	Identifier &	id,
		uint32_t &	measure,
		uint32_t &	adc )

Definition at line 118 of file EmcRawDataProvider.cxx.

                                                                                {
  
  uint32_t part = EmcID::barrel_ec(id);
  uint32_t itheta = EmcID::theta_module(id);
  uint32_t iphi   = EmcID::phi_module(id);
  int index = m_emcCalibConstSvc->getIndex(part,itheta,iphi);
  double adc2e = m_emcCalibConstSvc->getDigiCalibConst(index);
  double e = RawDataUtil::EmcCharge(measure, adc)*adc2e;
 
  measure =RawDataUtil::EmcChargeMeasure(e);
  adc     =RawDataUtil::EmcChargeChannel(e);
}

Referenced by EmcConverter::convert(), doCalib(), and getEmcDigiVec().

getAdcLowThreshold()

uint32_t EmcRawDataProvider::getAdcLowThreshold ( )

inline

Definition at line 62 of file EmcRawDataProvider.h.

{ return m_adcLowThreshold; };

getDeadCrystals()

std::vector< uint32_t > & EmcRawDataProvider::getDeadCrystals ( )

inline

Definition at line 66 of file EmcRawDataProvider.h.

{ return m_deadCrystals; };

getEmcDigiVec()

EmcDigiCol & EmcRawDataProvider::getEmcDigiVec

(

uint32_t

control

)

Definition at line 140 of file EmcRawDataProvider.cxx.

                                                             {
  MsgStream log(m_msgSvc, m_name);
  log << MSG::INFO << "EmcRawDataProvider::getEmcDigiVec..." << endreq;
  log << MSG::DEBUG << "vector size=" << m_emcDigiVec.size() << endreq;
 
  if(m_emcDigiVec.size()>0){
    if(control&Redo) m_emcDigiVec=EmcDigiCol();
    else             return m_emcDigiVec;
  }
  // Retrieve Hits Collection 
    // tianhl for mt
    std::string evtDataSvc_name("EventDataSvc");
    if(isGaudiThreaded(m_name)){
      evtDataSvc_name += getGaudiThreadIDfromName(m_name);
    }
    // tianhl for mt
  IDataProviderSvc* evtSvc;
  StatusCode sc = m_svcLocator->service(evtDataSvc_name.c_str(),evtSvc,true);
  if (!sc.isSuccess()){
    log << MSG::FATAL << "EmcRawDataProvider: ERROR Could not load EventDataSvc" << endreq;
  }
 
  SmartDataPtr<EmcDigiCol> emcDigiCol(evtSvc,"/Event/Digi/EmcDigiCol");
  if (!emcDigiCol) {
    log << MSG::FATAL << "Could not find Emc digi!!" << endreq;
    return m_emcDigiVec;
  }
  log << MSG::DEBUG << "start dealing with EmcRawCol " << emcDigiCol->size() << endreq; 
  EmcDigiCol::iterator iterEMC=emcDigiCol->begin();
  for(;iterEMC!= emcDigiCol->end();iterEMC++) {
    log << MSG::NIL << "vector size=" << m_emcDigiVec.size() << endreq;
    if(isGoodEmcDigi(control,*iterEMC)) m_emcDigiVec.insert(m_emcDigiVec.end(),*iterEMC);
    if(control&DoCalib) {
      if(m_emcCalibConstSvc!=0) doCalib(*iterEMC);
      else {
    log << MSG::WARNING << "require EMC calibration, but none service, ignore." << endreq; 
      }
    }
    if(control&DoOther) { }
  }
  log << MSG::VERBOSE << "ready for return" << endreq;
  return m_emcDigiVec;
}

Referenced by RawDataProviderSvc::getEmcDigiVec().

getHotCrystals()

std::vector< uint32_t > & EmcRawDataProvider::getHotCrystals ( )

inline

Definition at line 65 of file EmcRawDataProvider.h.

{ return m_hotCrystals; };

getTdcHighThreshold()

uint32_t EmcRawDataProvider::getTdcHighThreshold ( )

inline

Definition at line 64 of file EmcRawDataProvider.h.

{ return m_tHighThreshold; };

getTdcLowThreshold()

uint32_t EmcRawDataProvider::getTdcLowThreshold ( )

inline

Definition at line 63 of file EmcRawDataProvider.h.

{ return m_tLowThreshold; };

handle()

void EmcRawDataProvider::handle

(

const Incident &

inc

)

Definition at line 43 of file EmcRawDataProvider.cxx.

                                                  {
  MsgStream log(m_msgSvc, m_name);
  log << MSG::DEBUG << "inc.type=" << inc.type() << endreq;
  if ( inc.type() == "BeginEvent" ){
    EmcDigiCol empty;
    m_emcDigiVec=empty;
  }
  return;
}

Referenced by RawDataProviderSvc::handle().

initialize()

StatusCode EmcRawDataProvider::initialize ( bool mode = 0, ISvcLocator * svcLoc = 0, IMessageSvc * pMsg = 0 )

virtual

Definition at line 53 of file EmcRawDataProvider.cxx.

                                                                                           {
 
  RawDataProviderBase::initialize(pSvcLoc,pMsg);
  // test cut value
  MsgStream log(m_msgSvc, m_name);
  if(log.level()<=MSG::INFO){
    std::cout << "EmcRawDataProvider::    " << "elow=" << m_adcLowThreshold << ", tlow=" << m_tLowThreshold
          << ", thigh=" << m_tHighThreshold << std::endl;
    std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
    std::cout << "     hot crystals       ";
    for(;it!=m_hotCrystals.end();it++){
      std::cout << *it << "    ";  
    }
    std::cout << std::endl << "    dead crystals       ";
    for(it=m_deadCrystals.begin();it!=m_deadCrystals.end();it++){
      std::cout << *it << "    ";
    }
    std::cout << std::endl;
  }
 
  // get point of EMC calibration service
  StatusCode sc = m_svcLocator->service("EmcCalibConstSvc", m_emcCalibConstSvc);
  if(sc != StatusCode::SUCCESS) {
    log << MSG::ERROR << "Can't get EmcCalibConstSvc." << endreq;
    m_emcCalibConstSvc=0;
  }
  else if(mode)   m_emcCalibConstSvc->getDigiCalibConst(0);
 
  return StatusCode::SUCCESS;
}

Referenced by RawDataProviderSvc::initialize().

isGoodEmcDigi() [1/2]

bool EmcRawDataProvider::isGoodEmcDigi	(	uint32_t	control,
		EmcDigi *	emcDigi )

Definition at line 110 of file EmcRawDataProvider.cxx.

                                                                        {
  uint32_t adc=emcDigi->getChargeChannel();
  uint32_t measure=emcDigi->getMeasure();
  uint32_t tdc=emcDigi->getTimeChannel();
  Identifier id=emcDigi->identify();
  return isGoodEmcDigi(control,id.get_value(),measure,adc,tdc);
}

isGoodEmcDigi() [2/2]

bool EmcRawDataProvider::isGoodEmcDigi	(	uint32_t	control,
		uint32_t	id,
		uint32_t	measure,
		uint32_t	adc,
		uint32_t	tdc )

Definition at line 84 of file EmcRawDataProvider.cxx.

                                                  {
  if(control&DropLow) {
    if(measure==0&&adc<m_adcLowThreshold) return false;
  }
  if(control&DropFull) {
    if(measure==3) return false;
  }
  if(control&CutTime) {
    if(tdc<m_tLowThreshold||tdc>m_tHighThreshold) return false;
  }
  if(control&DropHot) {
    std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
    for(;it!=m_hotCrystals.end();it++){
      if((*it)==id) return false;
    }
  }
  if(control&DropDead) {
    std::vector<uint32_t>::iterator it=m_deadCrystals.begin();
    for(;it!=m_deadCrystals.end();it++){
      if((*it)==id) return false;
    }
  }
  return true;
}

Referenced by EmcConverter::convert(), getEmcDigiVec(), and isGoodEmcDigi().

removeDeadCrystal()

bool EmcRawDataProvider::removeDeadCrystal

(

const uint32_t

id

)

Definition at line 197 of file EmcRawDataProvider.cxx.

                                                       {
  std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
  for(;it!=m_deadCrystals.end();it++){
    if((*it)==teid) {
      m_deadCrystals.erase(it);
      break;
    }
  }
  if(it==m_deadCrystals.end()) return false;
  
  return true;
}

removeHotCrystal()

bool EmcRawDataProvider::removeHotCrystal

(

const uint32_t

id

)

Definition at line 184 of file EmcRawDataProvider.cxx.

                                                      {
  std::vector<uint32_t>::iterator it=m_hotCrystals.begin();
  for(;it!=m_hotCrystals.end();it++){
    if((*it)==teid) {
      m_hotCrystals.erase(it);
      break;
    }
  }
  if(it==m_hotCrystals.end()) return false;
 
  return true;
}

setDeadCrystals()

void EmcRawDataProvider::setDeadCrystals ( const std::vector< uint32_t > & idVec )

inline

Definition at line 56 of file EmcRawDataProvider.h.

{ m_deadCrystals = idVec; };

setELowThreshold()

void EmcRawDataProvider::setELowThreshold ( const uint32_t low )

inline

Definition at line 51 of file EmcRawDataProvider.h.

{ m_adcLowThreshold = low; };

Referenced by RawDataProviderSvc::initialize().

setHotCrystals()

void EmcRawDataProvider::setHotCrystals ( const std::vector< uint32_t > & idVec )

inline

Definition at line 54 of file EmcRawDataProvider.h.

{ m_hotCrystals = idVec; };

Referenced by RawDataProviderSvc::initialize().

setTHighThreshold()

void EmcRawDataProvider::setTHighThreshold ( const uint32_t high )

inline

Definition at line 53 of file EmcRawDataProvider.h.

{ m_tHighThreshold = high; };

Referenced by RawDataProviderSvc::initialize().

setTLowThreshold()

void EmcRawDataProvider::setTLowThreshold ( const uint32_t low )

inline

Definition at line 52 of file EmcRawDataProvider.h.

{ m_tLowThreshold = low; };

Referenced by RawDataProviderSvc::initialize().

---

The documentation for this class was generated from the following files:

• EmcRawDataProvider.h
• EmcRawDataProvider.cxx