#include <MdcGeomSvc.h>

Inheritance diagram for MdcGeomSvc:

Public Member Functions
	MdcGeomSvc (const std::string &name, ISvcLocator *svcloc)

	~MdcGeomSvc ()

virtual StatusCode	initialize ()

virtual StatusCode	finalize ()

void	handle (const Incident &inc)
	this handle function is prepared for special use

const MdcGeoWire *const	Wire (unsigned id)

const MdcGeoWire *const	Wire (unsigned lyrid, unsigned wirid)

const MdcGeoLayer *const	Layer (unsigned id)

const MdcGeoSuper *const	SuperLayer (unsigned id)

const MdcGeoGeneral *const	GeneralLayer (unsigned id)

const MdcGeoMisc *const	Misc (void)

const MdcGeoEnd *const	End (unsigned id)

const int	getWireSize ()

const int	getLayerSize ()

const int	getSuperLayerSize ()

const int	getGeneralLayerSize ()

const int	getSegmentNo ()

void	Dump ()

Static Public Member Functions
static bool	getSagFlag (void)

Static Public Attributes
static bool	m_doSag = true

static bool	m_readAlignParDataBase = true

static bool	m_nomcalignment =true

Detailed Description

Definition at line 25 of file MdcGeomSvc.h.

Constructor & Destructor Documentation

◆ MdcGeomSvc()

MdcGeomSvc::MdcGeomSvc	(	const std::string &	name,
		ISvcLocator *	svcloc )

Definition at line 30 of file MdcGeomSvc.cxx.

                                                                   : base_class(name, svcloc) {
    if(getenv("MDCGEOMSVCROOT")){
        m_alignFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/MdcAlignPar.dat");
        //std::cout<<" the MDC alignment file: "<<m_alignFilePath<<std::endl;
 
        m_wirePosFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/WirePosCalib.dat");
        //std::cout<<" the MDC wire position  file: "<<m_wirePosFilePath<<std::endl;
 
        m_wireTensionFilePath = std::string(getenv("MDCGEOMSVCROOT"))+std::string("/share/mdcWireTension.dat");
        //std::cout<<" the MDC wire tension file: "<<m_wireTensionFilePath<<std::endl;
 
    }
    else {
        std::cout<<"A fatal error, contact wangjk..."<<std::endl;
    }
 
    declareProperty("doSag",      m_doSag = true);
    declareProperty("readAlignParDataBase", m_readAlignParDataBase = true);
    declareProperty("mcnoalignment",m_nomcalignment=true);
    declareProperty("wholeShiftX",m_wholeShiftX = 0.);
    declareProperty("wholeShiftY",m_wholeShiftY = 0.);
    declareProperty("wholeShiftZ",m_wholeShiftZ = 0.);
    declareProperty("wholeRotatX",m_wholeRotatX = 0.);
    declareProperty("wholeRotatY",m_wholeRotatY = 0.);
    declareProperty("wholeRotatZ",m_wholeRotatZ = 0.);
    declareProperty("alignFilePath",m_alignFilePath);
    declareProperty("wirePosFilePath",m_wirePosFilePath);
    declareProperty("wireTensionFilePath",m_wireTensionFilePath);
    
 
}

◆ ~MdcGeomSvc()

MdcGeomSvc::~MdcGeomSvc ( )

Definition at line 112 of file MdcGeomSvc.cxx.

                       {
    for(vector<MdcGeoLayer*>::iterator it1 = fLayers.begin(); it1 != fLayers.end(); it1++) delete *it1;
    for(vector<MdcGeoSuper*>::iterator it2 = fSupers.begin(); it2 != fSupers.end(); it2++) delete *it2;
    for(vector<MdcGeoWire*>::iterator it3 = fWires.begin(); it3 != fWires.end(); it3++) delete *it3;
    for(vector<MdcGeoEnd*>::iterator it4 = fEnd.begin(); it4 != fEnd.end(); it4++) delete *it4;  
    fGenerals.clear();
    fWires.clear();
    fLayers.clear();
    fSupers.clear();
    fEnd.clear();  
}

Member Function Documentation

◆ Dump()

void MdcGeomSvc::Dump ( )

Definition at line 692 of file MdcGeomSvc.cxx.

692{}

Referenced by main().

◆ End()

const MdcGeoEnd *const MdcGeomSvc::End ( unsigned id )

Definition at line 811 of file MdcGeomSvc.cxx.

                              {
        if (id < fEnd.size())     
            return  fEnd[id];
 
        return 0;
    }  

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ finalize()

StatusCode MdcGeomSvc::finalize ( )

virtual

Definition at line 106 of file MdcGeomSvc.cxx.

                                  {
    MsgStream log(messageService(), name());
    log << MSG::INFO << name() << ": End of Run" << endreq;
    return StatusCode::SUCCESS;
}

Referenced by main().

◆ GeneralLayer()

const MdcGeoGeneral *const MdcGeomSvc::GeneralLayer ( unsigned id )

Definition at line 798 of file MdcGeomSvc.cxx.

                                       {
        if (id < fGenerals.size()) 
            return & fGenerals[id];
 
        return 0;
    }

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ getGeneralLayerSize()

const int MdcGeomSvc::getGeneralLayerSize ( )

Definition at line 682 of file MdcGeomSvc.cxx.

{
    return fGenerals.size();
}

◆ getLayerSize()

const int MdcGeomSvc::getLayerSize ( )

Definition at line 672 of file MdcGeomSvc.cxx.

{
    return fLayers.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ getSagFlag()

bool MdcGeomSvc::getSagFlag ( void )

static

Definition at line 819 of file MdcGeomSvc.cxx.

                                {
 
    return m_doSag;
}  

Referenced by MdcGeoWire::Sag().

◆ getSegmentNo()

const int MdcGeomSvc::getSegmentNo ( )

Definition at line 687 of file MdcGeomSvc.cxx.

{
    return fEnd.size();
}   

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ getSuperLayerSize()

const int MdcGeomSvc::getSuperLayerSize ( )

Definition at line 677 of file MdcGeomSvc.cxx.

{
    return fSupers.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ getWireSize()

const int MdcGeomSvc::getWireSize ( )

Definition at line 667 of file MdcGeomSvc.cxx.

{
    return fWires.size();
}

Referenced by MdcDetector::MdcDetector(), and KalFitAlg::set_Mdc().

◆ handle()

void MdcGeomSvc::handle ( const Incident & inc )

this handle function is prepared for special use

Definition at line 739 of file MdcGeomSvc.cxx.

                                          {
    MsgStream log( messageService(), name() );
    log << MSG::DEBUG << "handle: " << inc.type() << endreq;
    IDataProviderSvc* m_eventSvc;
    Gaudi::svcLocator()->service("EventDataSvc", m_eventSvc, true);
    SmartDataPtr<Event::EventHeader> eventHeader(m_eventSvc,"/Event/EventHeader");
    if (!eventHeader) { 
    log << MSG::FATAL << "Could not find Event Header" << endreq;
      }
    if (m_updataalign) return;
    if (inc.type() == "NewRun" ){
        log << MSG::DEBUG << "Begin Event" << endreq;
        clean();
        m_updataalign = true;
    if(m_nomcalignment&&m_mindex==0) {  
        int   RunNo=eventHeader->runNumber();
        if(RunNo<0)  m_readAlignParDataBase=false ;
           else   m_readAlignParDataBase=true;
        m_mindex+=1;
    cout<<"m__RunNo="<<RunNo<<"m_mindex="<<m_mindex<<endl;
        }
   //std::cout<<"############"<<m_readAlignParDataBase<<std::endl;
        ReadFilePar();          
    }
}

◆ initialize()

StatusCode MdcGeomSvc::initialize ( )

virtual

Definition at line 72 of file MdcGeomSvc.cxx.

                                    {
    MsgStream log(messageService(), name());
    log << MSG::INFO << name() << ": Start of run initialisation" << endreq;
 
    StatusCode sc = Service::initialize();
    if ( sc.isFailure() ) return sc;
    m_mindex=0; 
    m_updataalign = false;
    IIncidentSvc* incsvc;
    sc = service("IncidentSvc", incsvc);
    int priority = 100;
    if( sc.isSuccess() ){
        incsvc -> addListener(this, "NewRun", priority);
    }
 
    //    ReadFilePar(); //  get geometry data from file SimUtil/dat/Mdc.txt
    // Fill();  //  get geometry data from Database
 
    sc = service("CalibDataSvc", m_pCalibDataSvc, true);
 
    if ( !sc.isSuccess() ) {
        log << MSG::ERROR 
            << "Could not get IDataProviderSvc interface of CalibXmlCnvSvc" 
            << endreq;
        return sc;
    } else {
        log << MSG::DEBUG 
            << "Retrieved IDataProviderSvc interface of CalibXmlCnvSvc" 
            << endreq;
    }
     ReadFilePar(); 
    return StatusCode::SUCCESS;
}

Referenced by main().

◆ Layer()

const MdcGeoLayer *const MdcGeomSvc::Layer ( unsigned id )

Definition at line 782 of file MdcGeomSvc.cxx.

                                {
        if (id < fLayers.size())
            return  fLayers[id];
 
        return 0;
    }

Referenced by MdcUtilitySvc::cellTrackPassed(), MdcUtilitySvc::cellTrackPassedByPhiPatPar(), BesMdcSD::Distance(), KalFitAlg::execute(), BesMdcGeoParameter::InitFromSvc(), MdcDetector::MdcDetector(), MdcTrackUtil::nLayerTrackPassed(), MdcUtilitySvc::nLayerTrackPassed(), MdcUtilitySvc::pointOnHelixPatPar(), BesMdcSD::ProcessHits(), KalFitAlg::set_Mdc(), HoughHit::slayerType(), and Wire().

◆ Misc()

const MdcGeoMisc *const MdcGeomSvc::Misc ( void )

Definition at line 806 of file MdcGeomSvc.cxx.

                    {
    return & fMisc;
}

Referenced by BesMdcGeoParameter::InitFromSvc().

◆ SuperLayer()

const MdcGeoSuper *const MdcGeomSvc::SuperLayer ( unsigned id )

Definition at line 790 of file MdcGeomSvc.cxx.

                                     {
        if (id < fSupers.size())
            return  fSupers[id];
 
        return 0;
    }

◆ Wire() [1/2]

const MdcGeoWire *const MdcGeomSvc::Wire ( unsigned id )

Definition at line 766 of file MdcGeomSvc.cxx.

                               {
        if (id < fWires.size())
            return  fWires[id];
 
        return 0;
    }

Referenced by MdcUtilitySvc::cellTrackPassedByPhiPatPar(), BesMdcSD::Distance(), MdcUtilitySvc::docaPatPar(), MdcUtilitySvc::docaPatPar(), KalFitAlg::execute(), TrkReco::execute(), KalFitAlg::filter_fwd_anal(), KalFitAlg::filter_fwd_calib(), MdcUtilitySvc::getMdcMCAssoiciation(), HoughHit::HoughHit(), main(), MdcDetector::MdcDetector(), KalFitAlg::set_Mdc(), KalFitAlg::smoother_anal(), and KalFitAlg::smoother_calib().

◆ Wire() [2/2]

const MdcGeoWire *const MdcGeomSvc::Wire	(	unsigned	lyrid,
		unsigned	wirid )

Definition at line 774 of file MdcGeomSvc.cxx.

                                                  {
        if ((lyrid <fLayers.size()) && ((int) wirid < Layer(lyrid)->NCell()))
            return fWires[Layer(lyrid)->Wirst() + wirid];
 
        return 0;
    }

Member Data Documentation

◆ m_doSag

bool MdcGeomSvc::m_doSag = true

static

Definition at line 54 of file MdcGeomSvc.h.

Referenced by getSagFlag(), and MdcGeomSvc().

◆ m_nomcalignment

bool MdcGeomSvc::m_nomcalignment =true

static

Definition at line 56 of file MdcGeomSvc.h.

Referenced by handle(), and MdcGeomSvc().

◆ m_readAlignParDataBase

bool MdcGeomSvc::m_readAlignParDataBase = true

static

Definition at line 55 of file MdcGeomSvc.h.

Referenced by handle(), and MdcGeomSvc().

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Member Functions

Static Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ MdcGeomSvc()

◆ ~MdcGeomSvc()

Member Function Documentation

◆ Dump()

◆ End()

◆ finalize()

◆ GeneralLayer()

◆ getGeneralLayerSize()

◆ getLayerSize()

◆ getSagFlag()

◆ getSegmentNo()

◆ getSuperLayerSize()

◆ getWireSize()

◆ handle()

◆ initialize()

◆ Layer()

◆ Misc()

◆ SuperLayer()

◆ Wire() [1/2]

◆ Wire() [2/2]

Member Data Documentation

◆ m_doSag

◆ m_nomcalignment

◆ m_readAlignParDataBase