Ekhara Class Reference

#include <Ekhara.h>

Inheritance diagram for Ekhara:

Public Member Functions
	Ekhara (const std::string &name, ISvcLocator *pSvcLocator)
StatusCode	initialize ()
StatusCode	execute ()
StatusCode	finalize ()

Detailed Description

Definition at line 19 of file Ekhara.h.

Constructor & Destructor Documentation

Ekhara()

Ekhara::Ekhara	(	const std::string &	name,
		ISvcLocator *	pSvcLocator )

Definition at line 83 of file Ekhara.cxx.

                                                              : Algorithm(name, pSvcLocator)
{
    declareProperty( "Ecm",                 m_E = 1.02 );               // CMS-energy (GeV) 
    declareProperty( "InitialSeed",         m_initSeed = 100);
    declareProperty( "InitialEvents",       m_ngUpperBound = 50000 );  // # of events to determine the maximum           
    declareProperty( "Channel",             m_channel_id = 2 );         // pi+pi-(1),pi0(2),, eta(3), eta' (4)
    declareProperty( "Thetaminpositron",    cut_th1min = 0.00 );   //minimum angle e+
    declareProperty( "Thetamaxpositron",    cut_th1max = 180.00 ); //maximum angle e+
    declareProperty( "Energyminpositron",   cut_E1min = 0.00 );   //minimum Energy e+
    declareProperty( "Energymaxpositron",   cut_E1max = 110.00 ); //maximum Energy e+
    declareProperty( "Thetaminelectron",    cut_th2min = 0.00 );   //minimum angle e-
    declareProperty( "Thetamaxelectron",    cut_th2max = 180.00 ); //maximum angle e-
    declareProperty( "Energyminelectron",   cut_E2min = 0.00 );   //minimum Energy e-
    declareProperty( "Energymaxelectron",   cut_E2max = 110.00 ); //maximum Energy e-
    declareProperty( "Thetaminpion",        cut_thpionmin = 0.00 );   //minimum angle pi0
    declareProperty( "Thetamaxpion",        cut_thpionmax = 180.00 ); //maximum angle pi0
    declareProperty( "Eminpion",            cut_Epionmin = 0.00 );   //minimum Energy pi0
    declareProperty( "Emaxpion",            cut_Epionmax = 100.00 ); //maximum Energy pi0
    declareProperty( "sw_silent",           m_sw_silent = 1 ); //suppress output to stdout
    declareProperty( "sw_2pi",                 m_sw_2pi = 2 );           // s (1); t (2); s+t (3); s = signal
    declareProperty( "sw_1pi",                 m_sw_1pi = 2 );           // s (1); t (2); s+t (3); s = signal
    declareProperty( "sw",                 m_sw = 2 ); 
    declareProperty( "Formfactor",             m_piggFFsw = 5 );
    //
}

Member Function Documentation

execute()

StatusCode Ekhara::execute

(

)

Definition at line 199 of file Ekhara.cxx.

                           {
    MsgStream log(msgSvc(), name());
    log << MSG::INFO << "Ekhara in execute()" << endreq;
 
    EKHARA(0);
 
    //std::ofstream file1;
    //file1.open("file1.txt");
 
 
    double p1[4],p2[4],q1[4],q2[4];
    double pi1[4],pi2[4],qpion[4];
 
    for (int i=0;i<4;i++) {
        p1[i]=0.0;
        p2[i]=0.0;
        q1[i]=0.0;
        q2[i]=0.0;
        pi1[i]=0.0;
        pi2[i]=0.0;
        qpion[i]=0.0;
    }
 
    GET_MOMENTUM(p1,p2,q1,q2,pi1,pi2,qpion);
 
    double PosiMom = sqrt(q1[1]*q1[1]+q1[2]*q1[2]+q1[3]*q1[3]);
    double PosiThe = acos(q1[3]/PosiMom);
    double PosiPhi = atan2(q1[2],q1[1]);
 
    double ElecMom = sqrt(q2[1]*q2[1]+q2[2]*q2[2]+q2[3]*q2[3]);
    double ElecThe = acos(q2[3]/ElecMom);
    double ElecPhi = atan2(q2[2],q2[1]);
 
    double EtaPMom = sqrt(qpion[1]*qpion[1]+qpion[2]*qpion[2]+qpion[3]*qpion[3]);
    double EtaPThe = acos(qpion[3]/EtaPMom);
    double EtaPPhi = atan2(qpion[2],qpion[1]);
 
    hMCPosiMom->fill(PosiMom);
    hMCElecMom->fill(ElecMom);
    hMCEtaPMom->fill(EtaPMom);
 
    hMCPosiPhi->fill(PosiPhi*TMath::RadToDeg());
    hMCElecPhi->fill(ElecPhi*TMath::RadToDeg());
    hMCEtaPPhi->fill(EtaPPhi*TMath::RadToDeg());
 
    hMCPosiThe->fill(PosiThe*TMath::RadToDeg());
    hMCElecThe->fill(ElecThe*TMath::RadToDeg());
    hMCEtaPThe->fill(EtaPThe*TMath::RadToDeg());
 
 
 
    // Fill event information
    GenEvent* evt = new GenEvent(1,1);
 
    GenVertex* prod_vtx = new GenVertex();
    evt->add_vertex( prod_vtx );
 
    // incoming beam e+
    GenParticle* p = new GenParticle( HepLorentzVector(p1[1],p1[2],p1[3],p1[0]), -11, 3); 
    p->suggest_barcode(1 );
    prod_vtx->add_particle_in(p);
 
    // incoming beam e-
    p = new GenParticle(HepLorentzVector(p2[1],p2[2],p2[3],p2[0]), 11, 3); 
    p->suggest_barcode( 2 );
    prod_vtx->add_particle_in(p);
 
 
    // outcoming beam e+
    p = new GenParticle(HepLorentzVector(q1[1],q1[2],q1[3],q1[0]), -11, 1); 
    p->suggest_barcode(3 );
    prod_vtx->add_particle_out(p);
 
    // outcoming beam e-
    p = new GenParticle( HepLorentzVector(q2[1],q2[2],q2[3],q2[0] ), 11, 1); 
    p->suggest_barcode( 4 );
    prod_vtx->add_particle_out(p);
 
    if (m_channel_id == 2){ //e+e- pi0
        p = new GenParticle( HepLorentzVector( qpion[1],qpion[2],qpion[3],qpion[0]), 111, 1); 
        p->suggest_barcode( 5 );
        prod_vtx->add_particle_out(p);
    }
    else if (m_channel_id == 3){ //e+e- eta
        p = new GenParticle( HepLorentzVector( qpion[1],qpion[2],qpion[3],qpion[0]), 221, 1); 
        p->suggest_barcode( 5 );
        prod_vtx->add_particle_out(p);
    }
    else if (m_channel_id == 4){ //e+e- eta'
        p = new GenParticle( HepLorentzVector( qpion[1],qpion[2],qpion[3],qpion[0]), 331, 1); 
        p->suggest_barcode( 5 );
        prod_vtx->add_particle_out(p);
    }
    else if (m_channel_id == 1) { // e+e-pi+ pi-
        // pi+
        p = new GenParticle( HepLorentzVector( pi1[1],pi1[2],pi1[3],pi1[0]),211, 1); 
        p->suggest_barcode( 5 );
        prod_vtx->add_particle_out(p);
        // pi-
        p = new GenParticle( HepLorentzVector(pi2[1],pi2[2],pi2[3],pi2[0]), -211, 1); 
        p->suggest_barcode( 6 );
        prod_vtx->add_particle_out(p);
    } 
 
    if( log.level() <= MSG::INFO )
    {
      
      evt->print();
      
      //  file1<<qpion[1]<<endl;
      
    }
 
    // Check if the McCollection already exists
    SmartDataPtr<McGenEventCol> anMcCol(eventSvc(), "/Event/Gen");
    if (anMcCol!=0) 
    {
        // Add event to existing collection
        MsgStream log(messageService(), name());
        log << MSG::INFO << "Add McGenEvent to existing collection" << endreq;
        McGenEvent* mcEvent = new McGenEvent(evt);
        anMcCol->push_back(mcEvent);
    }
    else 
    {
        // Create Collection and add  to the transient store
        McGenEventCol *mcColl = new McGenEventCol;
        McGenEvent* mcEvent = new McGenEvent(evt);
        mcColl->push_back(mcEvent);
        StatusCode sc = eventSvc()->registerObject("/Event/Gen",mcColl);
        if (sc != StatusCode::SUCCESS) 
        {
            log << MSG::ERROR << "Could not register McGenEvent" << endreq;
            delete mcColl;
            delete evt;
            delete mcEvent;
            return StatusCode::FAILURE;
        }
        else 
        {
            log << MSG::INFO << "McGenEventCol created " << endreq;
        }
        //file1.close();
    }
 
    log<<MSG::INFO<< "before execute() return"<<endreq;
    return StatusCode::SUCCESS;
 
}

finalize()

StatusCode Ekhara::finalize

(

)

Definition at line 349 of file Ekhara.cxx.

                            {
    MsgStream log(msgSvc(), name());
    log << MSG::INFO << "Ekhara in finalize()" << endreq;
    log << MSG::INFO << "Ekhara is terminated now successfully" << endreq;
    DIAGNOSE();
    EKHARA(1);
    return StatusCode::SUCCESS;
}

initialize()

StatusCode Ekhara::initialize

(

)

Definition at line 109 of file Ekhara.cxx.

                              {
    MsgStream log(msgSvc(), name());
    log << MSG::INFO << "Ekhara in initialize()" << endreq;
 
 
    hMCPosiMom   = histoSvc()->book("MonteCarlo",1,"PosiMom",250,0.,5.);
    hMCPosiThe   = histoSvc()->book("MonteCarlo",2,"PosiThe",45,0.,180.);
    hMCPosiPhi   = histoSvc()->book("MonteCarlo",3,"PosiPhi",90,-180.,180.);
    hMCElecMom   = histoSvc()->book("MonteCarlo",4,"ElecMom",250,0.,5.);
    hMCElecThe   = histoSvc()->book("MonteCarlo",5,"ElecThe",45,0.,180.);
    hMCElecPhi   = histoSvc()->book("MonteCarlo",6,"ElecPhi",90,-180.,180.);
    hMCEtaPMom   = histoSvc()->book("MonteCarlo",7,"EtaPMom",250,0.,5.);
    hMCEtaPThe   = histoSvc()->book("MonteCarlo",8,"EtaPThe",45,0.,180.);
    hMCEtaPPhi   = histoSvc()->book("MonteCarlo",9,"EtaPPhi",90,-180.,180.);
 
 
    //set Bes unified random engine
    static const bool CREATEIFNOTTHERE(true);
    StatusCode RndmStatus = service("BesRndmGenSvc", p_BesRndmGenSvc, CREATEIFNOTTHERE);
    if (!RndmStatus.isSuccess() || 0 == p_BesRndmGenSvc)
    {
        log << MSG::ERROR << " Could not initialize Random Number Service" << endreq;
        return RndmStatus;
    }
    HepRandomEngine* engine  = p_BesRndmGenSvc->GetEngine("Ekhara");
    EkharaRandom::setRandomEngine(engine);
 
    CHANNELSEL.channel_id = m_channel_id;
    SWDIAG.sw_2pi=m_sw_2pi;
    SWDIAG.sw_1pi=m_sw_1pi;
    PIONFFSW.piggFFsw=m_piggFFsw;
    /*
    if(m_channel_id==1){
      m_sw=m_sw_2pi;}
    else if(m_channel_id==2||m_channel_id==3||m_channel_id==4){
      m_sw=m_sw_1pi;}
    */
    
// --- print run data ------------------------------
    cout << "-------------------------------------------------------------" << endl;
    if (CHANNELSEL.channel_id == 2) 
      cout << "     EKHARA 2.1 : e^+ e^- -> e^+ e^- pi^0" << endl;
    else if (CHANNELSEL.channel_id == 1) 
      cout << "     EKHARA 2.1: e^+ e^- -> e^+ e^- pi^+ pi^-" << endl;
    else if (CHANNELSEL.channel_id == 3) 
      cout << "     EKHARA 2.1: e^+ e^- -> e^+ e^- eta" << endl;
    else if (CHANNELSEL.channel_id == 4) 
      cout << "     EKHARA 2.1: e^+ e^- -> e^+ e^- eta'" << endl;
    
    
    if(m_channel_id ==2||m_channel_id ==3||m_channel_id ==4)
      printf(" %s %f,%f\n","angular cuts on e+                 = ",cut_th1min,cut_th1max);
      printf(" %s %f,%f\n","angular cuts on e-                 = ",cut_th2min,cut_th2max);
      printf(" %s %f,%f\n","Energy  cuts on e+                 = ",cut_E1min,cut_E1max);
      printf(" %s %f,%f\n","Energy  cuts on e-                 = ",cut_E2min,cut_E2max);
    //---------------------------------
    
    double xpar[100];
    xpar[0]=m_E;
    
    xpar[1]=m_ngUpperBound;
    xpar[2]=m_channel_id;
    xpar[3]=cut_th1min;
    xpar[4]=cut_th1max;
    xpar[5]=cut_E1min;
    xpar[6]=cut_E1max;
    xpar[7]=cut_th2min;
    xpar[8]=cut_th2max;
    xpar[9]=cut_E2min;
    xpar[10]=cut_E2max;
    xpar[11]=cut_thpionmin;
    xpar[12]=cut_thpionmax;
    xpar[13]=cut_Epionmin;
    xpar[14]=cut_Epionmax;
 
    log << MSG::DEBUG << "Options filled in array" << endreq;
    BOSS_INIT_READ(xpar);
    log << MSG::DEBUG << "Options read by FORTRAN routine" << endreq;
    DIAGNOSE();
    log << MSG::DEBUG << "FORTRAN diagnose passed" << endreq;
    EKHARA(-1);
    log << MSG::DEBUG << "Ekhara Fortran routines initialized" << endreq;
    //EKHARA_SET_ONE_EVENT_MODE();
    //log << MSG::DEBUG << "Ekhara set to single event mode" << endreq;
    //  EKHARA_SET_SILENT();
    //log << MSG::DEBUG << "Ekhara set to silent operation" << endreq;
 
    return StatusCode::SUCCESS;
}

---

The documentation for this class was generated from the following files:

• Ekhara.h
• Ekhara.cxx