MucBox Class Reference

#include <MucBox.h>

Inheritance diagram for MucBox:

Public Member Functions
	MucBox (int part, int segment, int layer, int id)
	MucBox (const MucBox &other)
MucBox &	operator= (const MucBox &other)
	~MucBox ()
virtual void	SetAlignment (double dx, double dy, double dz)
MucStripPlane *	GetStripPlane ()
MucRpc *	GetRpc (int upDown, int id)
MucBoxCover *	GetBoxCover (int upDown, int id)
Public Member Functions inherited from MucEntity
	MucEntity (int part, int segment, int layer)
	MucEntity (int part, int segment, int layer, int id)
	MucEntity (int part, int segment, int layer, int upDown, int id)
	MucEntity (int part, int segment, int layer, int upDown, int rpcId, int id)
	MucEntity (const MucEntity &other)
MucEntity &	operator= (const MucEntity &other)
virtual	~MucEntity ()
int	GetPart ()
int	GetSegment ()
int	GetLayer ()
int	GetUpDown ()
int	GetRpcId ()
int	GetID ()
double	GetTheta ()
double	GetRin ()
double	GetRout ()
double	GetRc ()
double	GetThin ()
double	GetW ()
double	GetH ()
double	GetL ()
double	GetWu ()
double	GetWd ()
double	GetArea ()
double	GetLocOrgInBes (int i)
double	GetObjRotToMot (int i)
double	GetObjOrgInBes (int i)
double	GetObjOrgInLoc (int i)
double *	GetLocOrgInBes ()
double *	GetObjRotToMot ()
double *	GetObjOrgInLoc ()
double *	GetObjOrgInBes ()
void	TransBesToLoc (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)
void	TransLocToBes (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

Protected Member Functions
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetRc ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetArea ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjRotToMot ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetRc ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetArea ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjRotToMot ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
virtual void	SetAlignment (double dx, double dy, double dz)

Additional Inherited Members
Protected Attributes inherited from MucEntity
int	m_Part
int	m_Segment
int	m_Layer
int	m_UpDown
int	m_RpcId
int	m_ID
double	m_Theta
double	m_Rin
double	m_Rout
double	m_Rc
double	m_Thin
double	m_W
double	m_H
double	m_L
double	m_Wu
double	m_Wd
double	m_Area
double	m_LocOrgInBes [3]
double	m_ObjRotToMot [3]
double	m_ObjOrgInBes [3]
double	m_ObjOrgInLoc [3]

Detailed Description

Definition at line 20 of file MucBox.h.

Constructor & Destructor Documentation

MucBox() [1/2]

MucBox::MucBox	(	int	part,
		int	segment,
		int	layer,
		int	id
	)

Definition at line 17 of file MucBox.cxx.

                                                         : MucEntity( part, segment, layer, id )
{
  MucBox::Init();
  
  m_MucStripPlane = NULL;
  m_MucRpc        = NULL;
  m_MucBoxCover   = NULL;
}

MucBox() [2/2]

MucBox::MucBox

(

const MucBox &

other

)

Definition at line 27 of file MucBox.cxx.

                                    : MucEntity( other )
{
  m_MucStripPlane = other.m_MucStripPlane;
  m_MucRpc        = other.m_MucRpc;
  m_MucBoxCover   = other.m_MucBoxCover;
}

~MucBox()

MucBox::~MucBox

(

)

Definition at line 48 of file MucBox.cxx.

{   
  delete m_MucStripPlane;
  delete m_MucRpc;
  delete m_MucBoxCover; 
}

Member Function Documentation

GetBoxCover()

MucBoxCover * MucBox::GetBoxCover	(	int	upDown,
		int	id
	)

Definition at line 92 of file MucBox.cxx.

{
  if( m_MucBoxCover != NULL ) delete m_MucBoxCover;
  return ( m_MucBoxCover = new MucBoxCover( m_Part, m_Segment, m_Layer, upDown, id ) );
}

GetRpc()

MucRpc * MucBox::GetRpc	(	int	upDown,
		int	id
	)

Definition at line 86 of file MucBox.cxx.

{
  if( m_MucRpc != NULL )  delete m_MucRpc;
  return ( m_MucRpc = new MucRpc( m_Part, m_Segment, m_Layer, upDown, id ) );
}

GetStripPlane()

MucStripPlane * MucBox::GetStripPlane

(

)

Definition at line 78 of file MucBox.cxx.

{
  if( m_MucStripPlane != NULL )
    return m_MucStripPlane;
  else
    return ( m_MucStripPlane = new MucStripPlane( m_Part, m_Segment, m_Layer, ((m_Part==BRID)?0:-1) ) );
}

Init()

void MucBox::Init ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 56 of file MucBox.cxx.

{
  SetTheta();
  SetRin();
  SetRout();
  SetRc();
  
  SetThin();
  SetW();
  SetWu();
  SetWd();
  SetH();
  SetL();
  SetArea();
  
  SetLocOrgInBes();
  SetObjRotToMot();
  SetObjOrgInBes();
  SetObjOrgInLoc();
}

Referenced by MucBox().

operator=()

MucBox & MucBox::operator=

(

const MucBox &

other

)

Definition at line 35 of file MucBox.cxx.

{
  if( this == &other) return *this;
  
  MucEntity::operator = (other);
  m_MucRpc        = other.m_MucRpc;
  m_MucBoxCover   = other.m_MucBoxCover;
  m_MucStripPlane = other.m_MucStripPlane;
 
  return *this; 
}

SetAlignment()

void MucBox::SetAlignment ( double  dx, double  dy, double  dz  )

virtual

Reimplemented from MucEntity.

Definition at line 397 of file MucBox.cxx.

{
  if( m_Part == BRID || m_ID == -1 )
  {
    m_ObjOrgInLoc[0] += dx;
    m_ObjOrgInLoc[1] += dy;
    m_ObjOrgInLoc[2] += dz;
  }
}

Referenced by MucGeoMgr::CreateBox().

SetArea()

void MucBox::SetArea ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 240 of file MucBox.cxx.

{
  if( m_Part == BRID )  m_Area = m_W * m_L;
  else                  m_Area = m_W * m_L; 
}

Referenced by Init().

SetH()

void MucBox::SetH ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 161 of file MucBox.cxx.

{
  if( m_Part == BRID )
    m_H = BOX_TH;
  else
  {
    if( m_ID == -1 ) // virtual encap gap
      m_H = E_AS_RMAX - E_BOX_DR - E_GP_DY;
    else if( m_ID == 1 ) // for panel logical operation "AND" valid;
      m_H = E_AS_RMAX - E_BOX_DR - E_GP_RMIN[m_Layer] + OVERLAP_WIDTH;
    else    
      m_H = E_AS_RMAX - E_BOX_DR - E_GP_RMIN[m_Layer];
  }
}

Referenced by Init().

SetL()

void MucBox::SetL ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 176 of file MucBox.cxx.

{
  if( m_Part == BRID )
  {
    if( m_Segment != B_TOP || m_ID == -1 )
      m_L = B_BOX_LT;
    else // top segment
    {
      if( m_ID == 2 )
        m_L = B_BOX_LT - B_TOPRPC_LTS[(m_Layer==0)?1:(m_Layer%2)];
      else
        m_L = B_TOPRPC_LTS[(m_Layer==0)?1:(m_Layer%2)];
    }
  }
  else
    m_L = BOX_TH;
}

Referenced by Init().

SetLocOrgInBes()

void MucBox::SetLocOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 247 of file MucBox.cxx.

{
  double x, y, z;
  x = y = z = 0.;
  
  if( m_Part == BRID )
  {
    x = m_Rc*cos( m_Theta );
    y = m_Rc*sin( m_Theta );
    z = 0.;
  } // barrel
  else
  {
    //------------ set x and y ---------------
    // segment 0 as reference
    if( m_ID == -1 ) // for box, local is gap
    {
      x = (E_AS_RMAX + E_GP_DX) / 2.0;
      y = (E_AS_RMAX + E_GP_DY) / 2.0;
    }
    else // for box panel, local is box
    {
      x = (E_AS_RMAX - E_BOX_DR + E_GP_DX) / 2.0;
      y = (E_AS_RMAX - E_BOX_DR + E_GP_DY) / 2.0;
    }
    
    // x, y signs of coordinate different by segment 
    if ( m_Segment == 0 )       { ;               }
    else if ( m_Segment == 1 )  { x = -x;         }
    else if ( m_Segment == 2 )  { x = -x; y = -y; }
    else                        { y = -y;         }
    
    //------------- set z --------------------
    for( int i=0; i<m_Layer+1; i++ ) z += E_AS_TH[i];
    
    z += m_Layer * AS_GAP;
    z += (E_AS_ZMAX - E_AS_TOTAL_TH) + AS_GAP/2.0;  
    z *= cos( m_Part*MUC_PI/2.0 );
    
  }// endcap
    
  m_LocOrgInBes[0] = x;
  m_LocOrgInBes[1] = y;
  m_LocOrgInBes[2] = z;
    
  // limit cut
  for(int i=0;i<3;i++) {
    if( fabs(m_LocOrgInBes[i]) < ERR_LIMIT ) m_LocOrgInBes[i] = 0;
  }
}

Referenced by Init().

SetObjOrgInBes()

void MucBox::SetObjOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 315 of file MucBox.cxx.

{
  double x, y, z;
  x = y = z = 0.;
  
  if( m_Part == BRID )
  {
    if( m_Segment != B_TOP  || m_ID == -1 )
      for( int i=0; i<3; i++ ) m_ObjOrgInBes[i] = m_LocOrgInBes[i];
    else // top segment
    {
      // set x
      if( m_ID == 2 ) x = 0.;
      else            x = (1-2*m_ID) * ( B_BOX_WT[m_Layer] + B_BOX_SLOT_WT )/4.0; 
      
      // set z
      if( m_ID == 2 ) z = -B_TOPRPC_LTS[(m_Layer==0)?1:(m_Layer%2)] / 2.0;
      else            z = ( B_BOX_LT - B_TOPRPC_LTS[(m_Layer==0)?1:(m_Layer%2)] )/2.0;
      
      m_ObjOrgInBes[0] = x;
      m_ObjOrgInBes[2] = z;
                  
      // set y
      m_ObjOrgInBes[1] = m_LocOrgInBes[1];
      
      // limit cut
      for( int i=0; i<3; i++ ) 
        if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0;
    }
  }
  else // endcap 
  {
    //------------- set x, y --------------------------
    // segment 0 as reference 
    if( m_ID == -1 ) {
      x = (E_AS_RMAX - E_BOX_DR + E_GP_DX) / 2.0; 
      y = (E_AS_RMAX - E_BOX_DR + E_GP_DY) / 2.0;   
    }
    else if( m_ID == 0 ) {
      x = m_Rc;
      y = ( m_Rc * tan( m_Theta ) + E_GP_DY ) / 2.0;
    }
    else if ( m_ID ==1 ) {
      x = m_Rc * cos( m_Theta );
      y = m_Rc * sin( m_Theta );
    }
    else { // m_ID == 2
      x = ( m_Rc / tan( m_Theta ) + E_GP_DX ) / 2.0;
      y = m_Rc;
    }
    
    // x, y signs of coordinate different by segment 
    if      ( m_Segment == 0 )  { ;               }
    else if ( m_Segment == 1 )  { x = -x;         }
    else if ( m_Segment == 2 )  { x = -x; y = -y; }
    else                        { y = -y;         }
    
    m_ObjOrgInBes[0] = x;
    m_ObjOrgInBes[1] = y;   
    
    // limit cut
    for( int i=0; i<2; i++ ) 
      if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0;
    
    //---------- set z ---------------------
    m_ObjOrgInBes[2] = m_LocOrgInBes[2];
  } // else, panels
}

Referenced by Init().

SetObjOrgInLoc()

void MucBox::SetObjOrgInLoc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 384 of file MucBox.cxx.

{
  if( m_Part == BRID )
  {
    if( m_Segment != B_TOP )
      for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = 0.;
    else
      for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];
  }
  else
    for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];
}

Referenced by Init().

SetObjRotToMot()

void MucBox::SetObjRotToMot ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 298 of file MucBox.cxx.

{
  m_ObjRotToMot[0] = 0.;
  m_ObjRotToMot[1] = 0.;
  
  if( m_Part == BRID )
  {
    // for barrel segment 5, 6 and 7, the box is uppended in the gap
    if( m_Segment == 5 || m_Segment == 6 || m_Segment == 7 )
      m_ObjRotToMot[2] = MUC_PI;
    else
      m_ObjRotToMot[2] = 0.;
  }
  else
    m_ObjRotToMot[2] = 0.;
}

Referenced by Init().

SetRc()

void MucBox::SetRc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 124 of file MucBox.cxx.

{
  if( m_Part == BRID )  m_Rc = B_AS_RMIN[m_Layer] - AS_GAP/2.0;
  else {
    if( m_ID == -1 )    m_Rc = sqrt(2.0) * ( E_AS_RMAX - E_BOX_DR ) / 2.0;
    else                m_Rc = (m_Rin + m_Rout)/2.0;
  }
}

Referenced by Init().

SetRin()

void MucBox::SetRin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 109 of file MucBox.cxx.

{
  if( m_Part == BRID )  m_Rin = B_AS_RMIN[m_Layer] - ( AS_GAP + BOX_TH ) / 2.0;
  else {
    if( m_ID == -1 )    m_Rin = 0.;
    else                m_Rin = E_GP_RMIN[m_Layer];
  }
}

Referenced by Init().

SetRout()

void MucBox::SetRout ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 118 of file MucBox.cxx.

{
  if( m_Part == BRID )  m_Rout = B_AS_RMIN[m_Layer] -( AS_GAP - BOX_TH ) / 2.0;
  else                  m_Rout = E_AS_RMAX - E_BOX_DR;
}

Referenced by Init().

SetTheta()

void MucBox::SetTheta ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 100 of file MucBox.cxx.

{
  if( m_Part == BRID )  m_Theta = m_Segment * ( MUC_PI/4.0 );
  else {
    if( m_ID == -1 )    m_Theta = ( 2*m_Segment + 1 ) * ( MUC_PI/4.0 );
    else                m_Theta = ( MUC_PI/4.0 ) + ( m_ID - 1) * MUC_PI / 8.0 ;
  }
}

Referenced by Init().

SetThin()

void MucBox::SetThin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 133 of file MucBox.cxx.

{
  m_Thin = BOX_TH;
}

Referenced by Init().

SetW()

void MucBox::SetW ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 138 of file MucBox.cxx.

{
  if( m_Part == BRID)
  {
    if( m_Segment != B_TOP )
      m_W = B_BOX_WT[m_Layer];
    else    // top segment
    {
      if( m_ID == -1 || m_ID == 2 )
      m_W = B_BOX_WT[m_Layer];
      else
      m_W = ( B_BOX_WT[m_Layer] - B_BOX_SLOT_WT )/2.0;
    }
  }
  else
  {
    if( m_ID == -1 ) // virtual encap gap 
      m_W = E_AS_RMAX - E_BOX_DR - E_GP_DX;
    else
      m_W = 0.;
  }
}

Referenced by Init().

SetWd()

void MucBox::SetWd ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 217 of file MucBox.cxx.

{
  if( m_Part == BRID )
    m_Wd = m_W;
  else
  { 
    if( m_ID == -1 )     // virtual box
      m_Wd = m_W;
    else if( m_ID == 1 ) // center fraction
    {   
      m_Wd = 2 * VALUE * m_Rout;
      m_Wd += 2*VALUE*(2.0/2); // for panel operation "AND" valid
      m_Wd += OVERLAP_WIDTH;
    }   
    else if( m_ID == 0 )
      m_Wd = VALUE * m_Rout - E_GP_DY;
    else
      m_Wd = VALUE * m_Rout - E_GP_DX;
    
    if( m_ID != -1 ) m_Wd+=OVERLAP_WIDTH; // avoid panels overlap
  }
}

Referenced by Init().

SetWu()

void MucBox::SetWu ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 194 of file MucBox.cxx.

{
  if( m_Part == BRID )
    m_Wu = m_W;
  else
  { 
    if( m_ID == -1 )     // virtual box 
      m_Wu = m_W;
    else if( m_ID == 1 ) // center fraction
    {   
      m_Wu = 2 * VALUE * m_Rin ;
      m_Wu -= 2*VALUE*(2.0/2); // for panel operation "AND" valid
      m_Wu += OVERLAP_WIDTH;
    }   
    else if( m_ID == 0 )
      m_Wu = VALUE * m_Rin - E_GP_DY;
    else
      m_Wu = VALUE * m_Rin - E_GP_DX;
    
    if( m_ID != -1 ) m_Wu+=OVERLAP_WIDTH; // avoid panels overlap
  }
}

Referenced by Init().

---

The documentation for this class was generated from the following files:

• MucBox.h
• MucBox.cxx