MucStripPlane Class Reference

#include <MucStripPlane.h>

Inheritance diagram for MucStripPlane:

Public Member Functions
	MucStripPlane (int part, int segment, int layer, int id)
	MucStripPlane (const MucStripPlane &other)
MucStripPlane &	operator= (const MucStripPlane &other)
virtual	~MucStripPlane ()
virtual void	SetAlignment (double dx, double dy, double dz)
MucStrip *	GetStrip (int id)
Public Member Functions inherited from MucEntity
	MucEntity (int part, int segment, int layer)
	MucEntity (int part, int segment, int layer, int id)
	MucEntity (int part, int segment, int layer, int upDown, int id)
	MucEntity (int part, int segment, int layer, int upDown, int rpcId, int id)
	MucEntity (const MucEntity &other)
MucEntity &	operator= (const MucEntity &other)
virtual	~MucEntity ()
int	GetPart ()
int	GetSegment ()
int	GetLayer ()
int	GetUpDown ()
int	GetRpcId ()
int	GetID ()
double	GetTheta ()
double	GetRin ()
double	GetRout ()
double	GetRc ()
double	GetThin ()
double	GetW ()
double	GetH ()
double	GetL ()
double	GetWu ()
double	GetWd ()
double	GetArea ()
double	GetLocOrgInBes (int i)
double	GetObjRotToMot (int i)
double	GetObjOrgInBes (int i)
double	GetObjOrgInLoc (int i)
double *	GetLocOrgInBes ()
double *	GetObjRotToMot ()
double *	GetObjOrgInLoc ()
double *	GetObjOrgInBes ()
void	TransBesToLoc (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)
void	TransLocToBes (double LocCoord[], double BesCoord[], double LocOrgInBes[], double Rot_z)

Protected Member Functions
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRc ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
Protected Member Functions inherited from MucEntity
virtual void	Init ()
virtual void	SetTheta ()
virtual void	SetRin ()
virtual void	SetRout ()
virtual void	SetRc ()
virtual void	SetThin ()
virtual void	SetW ()
virtual void	SetH ()
virtual void	SetL ()
virtual void	SetWu ()
virtual void	SetWd ()
virtual void	SetArea ()
virtual void	SetLocOrgInBes ()
virtual void	SetObjRotToMot ()
virtual void	SetObjOrgInBes ()
virtual void	SetObjOrgInLoc ()
virtual void	SetAlignment (double dx, double dy, double dz)

Additional Inherited Members
Protected Attributes inherited from MucEntity
int	m_Part
int	m_Segment
int	m_Layer
int	m_UpDown
int	m_RpcId
int	m_ID
double	m_Theta
double	m_Rin
double	m_Rout
double	m_Rc
double	m_Thin
double	m_W
double	m_H
double	m_L
double	m_Wu
double	m_Wd
double	m_Area
double	m_LocOrgInBes [3]
double	m_ObjRotToMot [3]
double	m_ObjOrgInBes [3]
double	m_ObjOrgInLoc [3]

Detailed Description

Definition at line 19 of file MucStripPlane.h.

Constructor & Destructor Documentation

MucStripPlane() [1/2]

MucStripPlane::MucStripPlane	(	int	part,
		int	segment,
		int	layer,
		int	id
	)

Definition at line 17 of file MucStripPlane.cxx.

                                                                       : MucEntity( part, segment, layer, id )
{
    MucStripPlane::Init();
    m_MucStrip = NULL;
}

MucStripPlane() [2/2]

MucStripPlane::MucStripPlane

(

const MucStripPlane &

other

)

Definition at line 24 of file MucStripPlane.cxx.

                                                         : MucEntity( other )
{
    m_MucStrip  = other.m_MucStrip;
}

~MucStripPlane()

MucStripPlane::~MucStripPlane ( )

virtual

Definition at line 43 of file MucStripPlane.cxx.

{   
    delete m_MucStrip;
}

Member Function Documentation

GetStrip()

MucStrip * MucStripPlane::GetStrip

(

int

id

)

Definition at line 70 of file MucStripPlane.cxx.

{
    if( m_MucStrip != NULL ) delete m_MucStrip;
 
    return ( m_MucStrip = new MucStrip( m_Part, m_Segment, m_Layer, id ) );
}

Init()

void MucStripPlane::Init ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 49 of file MucStripPlane.cxx.

{
        SetTheta();
        SetRin();
        SetRout();
        SetRc();
 
        SetThin();
        SetW();
        SetWu();
        SetWd();
        SetH();
        SetL();
 
        SetLocOrgInBes();
        SetObjOrgInBes();
        SetObjOrgInLoc();
}

Referenced by MucStripPlane().

operator=()

MucStripPlane & MucStripPlane::operator=

(

const MucStripPlane &

other

)

Definition at line 30 of file MucStripPlane.cxx.

{
    if( this == &other)
                return *this;
 
    MucEntity::operator =(other);
 
        m_MucStrip      = other.m_MucStrip;
 
        return *this;   
}

SetAlignment()

void MucStripPlane::SetAlignment ( double  dx, double  dy, double  dz  )

virtual

Reimplemented from MucEntity.

Definition at line 377 of file MucStripPlane.cxx.

{
    
        if( m_Part == BRID || m_ID == -1 )
        {
        m_ObjOrgInLoc[0] += dx;
            m_ObjOrgInLoc[1] += dy;
            m_ObjOrgInLoc[2] += dz;
        }
}

Referenced by MucGeoMgr::CreateStripPlane().

SetH()

void MucStripPlane::SetH ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 157 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_H = STR_TH;
        else
        {
                if( m_ID == -1 ) // temparory strip plane
                        m_H = E_AS_RMAX - E_BOX_DR - E_GP_DY - (E_STRPLN_DA + E_STRPLN_DB[(m_Layer==0)?0:1]);
                else
        {
                        m_H = E_AS_RMAX - E_BOX_DR - E_GP_RMIN[m_Layer] - E_STRPLN_DR - E_STRPLN_DB[(m_Layer==0)?0:1];
            if(m_ID==1) m_H += (E_STR_DST+5.0)/sqrt(2.0);
 
            m_H += 4*OVERLAP_WIDTH;
        }
        }
}

Referenced by Init().

SetL()

void MucStripPlane::SetL ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 175 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
    {
       if( m_Segment == B_TOP )
       {
        // 0,1,2,3,7: CUT = 1; 2,4,6,8: CUT = 0;   
        if( m_ID == -1) m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN];
        else if( m_ID == 2 ) m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN] - B_ZSTR_CUT[(m_Layer==0)?1:(m_Layer%2)];
        else            m_L = B_ZSTR_CUT[(m_Layer==0)?1:(m_Layer%2)];
       }
       else    
                m_L = B_BOX_LT - 2*B_BOX_DZ[SL_DOWN];
    }   
        else
                m_L = STR_TH;
}

Referenced by Init().

SetLocOrgInBes()

void MucStripPlane::SetLocOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 244 of file MucStripPlane.cxx.

{
        double x, y, z=0;
 
        if( m_Part == BRID )
        {
                x = m_Rc*cos( m_Theta );
                y = m_Rc*sin( m_Theta );
                z = 0.;
        } // barrel
        else
        {
                //-------------- set x and y ----------------------
        // segment 0 as reference
        if( m_ID == -1 )
        {   
                    x = (E_AS_RMAX - E_BOX_DR + E_GP_DX) / 2.0;
                    y = (E_AS_RMAX - E_BOX_DR + E_GP_DY) / 2.0;         
        }
        else
        {
            x = (E_AS_RMAX+E_GP_DX+E_STRPLN_DA -E_BOX_DR-E_STRPLN_DB[(m_Layer==0)?0:1])/2.0;
            y = (E_AS_RMAX+E_GP_DY+E_STRPLN_DA -E_BOX_DR-E_STRPLN_DB[(m_Layer==0)?0:1])/2.0;
        }
    
                // x, y signs of coordinate different by segment 
                if( m_Segment == 0 )       {    ;               }
                else if ( m_Segment == 1 ) {    x = -x;         }
                else if ( m_Segment == 2 ) {    x = -x; y = -y; }
                else                       {    y = -y;         }
 
                //-------------- set z -----------------------------
                for( int i=0; i<m_Layer+1; i++ ) z += E_AS_TH[i];
 
                z += m_Layer * AS_GAP;
                z += (E_AS_ZMAX - E_AS_TOTAL_TH + z) + AS_GAP/2.0;
        z *= cos( m_Part*MUC_PI/2.0 );
 
        }// endcap
 
        m_LocOrgInBes[0] = x;
        m_LocOrgInBes[1] = y;
        m_LocOrgInBes[2] = z;
 
        // limit cut
        for(int i=0;i<3;i++) {
                if( fabs(m_LocOrgInBes[i]) < ERR_LIMIT ) m_LocOrgInBes[i] = 0.;
        }
}

Referenced by Init().

SetObjOrgInBes()

void MucStripPlane::SetObjOrgInBes ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 294 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
        {
                for( int i=0; i<3; i++ )
                        m_ObjOrgInBes[i] = m_LocOrgInBes[i];
        }
        else // endcap
        {
        //------------- set x and y --------------------
                // segment 0 as reference 
            double x, y;
                if( m_ID == -1 )
                {
                        x = E_GP_DX + E_STRPLN_DA + m_W/2.0;
                        y = E_GP_DY + E_STRPLN_DA + m_H/2.0;
                }
                else if( m_ID == 0 )
                {
                        x = m_Rc;
                        y = ( m_Rc * tan( m_Theta ) + E_GP_DY + E_STRPLN_DA ) / 2.0;
                }
                else if ( m_ID ==1 )
                {
                        x = m_Rc * cos( m_Theta );
                        y = m_Rc * sin( m_Theta );
                }
                else // m_ID == 2
                {
                x = ( m_Rc / tan( m_Theta ) + E_GP_DX + E_STRPLN_DA ) / 2.0;
                        y = m_Rc;
                }
 
                // x, y signs of coordinate different by segment 
                if( m_Segment == 0 )       {    ;               }
                else if ( m_Segment == 1 ) {    x = -x;         }
                else if ( m_Segment == 2 ) {    x = -x; y = -y; }
                else                       {    y = -y;         }
 
        m_ObjOrgInBes[0] = x;   
        m_ObjOrgInBes[1] = y;
 
            // limit cut
            for( int i=0; i<2; i++ ) {
                    if( fabs(m_ObjOrgInBes[i]) < ERR_LIMIT ) m_ObjOrgInBes[i] = 0.;
            }
 
        // ---------------- set z ----------------------
                m_ObjOrgInBes[2] = m_LocOrgInBes[2];
 
        } // else, endcap
}

Referenced by Init().

SetObjOrgInLoc()

void MucStripPlane::SetObjOrgInLoc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 347 of file MucStripPlane.cxx.

{
    double x, y, z;
        if( m_Part == BRID )
    {
        if( m_Segment == B_TOP && m_ID !=-1 )
        {
            // x
            if(m_ID == 2)      x = 0.0;
            else if(m_ID == 0) x = (B_PHISTR_CUT + m_W)/2.0;
            else           x = -(B_PHISTR_CUT + m_W)/2.0;
 
            // y
            y = 0.0;
 
            // z
            if(m_ID == 2)      z =  - B_ZSTR_CUT[(m_Layer==0)?1:(m_Layer%2)]/2.0;
            else               z =  B_BOX_LT/2.0 - B_BOX_DZ[SL_DOWN] - B_ZSTR_CUT[(m_Layer==0)?1:(m_Layer%2)]/2;
 
            m_ObjOrgInLoc[0] = x;
            m_ObjOrgInLoc[1] = y;
            m_ObjOrgInLoc[2] = z;
        }
        else    
        {   for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = 0.;  }
    }   
        else
                for(int i=0; i<3; i++) m_ObjOrgInLoc[i] = m_ObjOrgInBes[i] - m_LocOrgInBes[i];
}

Referenced by Init().

SetRc()

void MucStripPlane::SetRc ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 112 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_Rc = B_AS_RMIN[m_Layer] - AS_GAP/2.0;
        else
        {
                if( m_ID == -1 )
                        m_Rc = sqrt(2.0) * ( E_AS_RMAX - E_BOX_DR - E_STRPLN_DB[(m_Layer==0)?0:1] ) / 2.0;
                else
                        m_Rc = (m_Rin + m_Rout)/2.0;
        }
}

Referenced by Init().

SetRin()

void MucStripPlane::SetRin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 91 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_Rin = B_AS_RMIN[m_Layer] - ( AS_GAP + STR_TH ) / 2.0;
        else
        {
                if( m_ID == -1 )
                        m_Rin = 0.;
                else
                        m_Rin = E_GP_RMIN[m_Layer] + E_STRPLN_DR;
        }
}

Referenced by Init().

SetRout()

void MucStripPlane::SetRout ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 104 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_Rout = B_AS_RMIN[m_Layer] - ( AS_GAP - STR_TH ) / 2.0;
        else
                m_Rout = E_AS_RMAX - E_BOX_DR - E_STRPLN_DB[(m_Layer==0)?0:1];
}

Referenced by Init().

SetTheta()

void MucStripPlane::SetTheta ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 78 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_Theta = m_Segment * ( MUC_PI/4.0 );
        else
        {
                if( m_ID == -1 )
                        m_Theta = ( 2*m_Segment + 1 ) * ( MUC_PI/4.0 );
                else
                        m_Theta = ( MUC_PI/4.0 ) + ( m_ID - 1) * MUC_PI / 8.0 ;
        }
}

Referenced by Init().

SetThin()

void MucStripPlane::SetThin ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 125 of file MucStripPlane.cxx.

{
    m_Thin = STR_TH;
}

Referenced by Init().

SetW()

void MucStripPlane::SetW ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 130 of file MucStripPlane.cxx.

{
    double offset = 0;
    if( (m_Layer+1)%2 == 0 ) offset = 2*B_BOX_DZ[1]; // even layers
    else             offset = 2*B_BOX_DT[1]; // odd layers
 
        if( m_Part == BRID)
    {   
           if( m_Segment == B_TOP ) 
       {           
        if(m_ID == -1 || m_ID == 2)
            m_W = B_BOX_WT[m_Layer] - offset;
        else
            m_W = (B_BOX_WT[m_Layer] - offset - B_PHISTR_CUT)/2.0;  
       }       
       else
         m_W = B_BOX_WT[m_Layer] - offset;
    }   
        else
        {
                if( m_ID == -1 ) // temparory strip plane  
                        m_W = E_AS_RMAX - E_BOX_DR - E_GP_DX - (E_STRPLN_DA + E_STRPLN_DB[(m_Layer==0)?0:1]);
                else
                        m_W = 0.;
        }
}

Referenced by Init().

SetWd()

void MucStripPlane::SetWd ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 216 of file MucStripPlane.cxx.

{
     if( m_Part == BRID )
                m_Wd = m_W;
        else
        {   
        if( m_ID == -1 )     // temparory strip plane
            m_Wd = m_W;
        else if( m_ID == 1 ) // center panel 
        {   
                    m_Wd = 2 * VALUE * m_Rout;
            // zoom in with a small dimension for covering strips 
            m_Wd += VALUE*(E_STR_DST+5.0)/sqrt(2.0);
        }   
                else if( m_ID == 0 )
                    m_Wd = VALUE * m_Rout - E_GP_DY - E_STRPLN_DA;
        else
            m_Wd = VALUE * m_Rout - E_GP_DX - E_STRPLN_DA;
 
        // for "AND" operation of panels
        //m_Wd += (VALUE + 1.0)*OVERLAP_WIDTH;
        m_Wd += 4*OVERLAP_WIDTH;
        }
}

Referenced by Init().

SetWu()

void MucStripPlane::SetWu ( )

protectedvirtual

Reimplemented from MucEntity.

Definition at line 193 of file MucStripPlane.cxx.

{
        if( m_Part == BRID )
                m_Wu = m_W;
        else
        {   
        if( m_ID == -1 )     //  temparory strip plane 
            m_Wu = m_W;
                else if( m_ID == 1 ) // center panel
        {   
                        m_Wu = 2 * VALUE * m_Rin ;
            m_Wu -= VALUE*(E_STR_DST+5.0)/sqrt(2.0);
        }   
                else if( m_ID == 0 )
                        m_Wu = VALUE * m_Rin - E_GP_DY - E_STRPLN_DA;
        else
            m_Wu = VALUE * m_Rin - E_GP_DX - E_STRPLN_DA;
 
        //m_Wu += (1-VALUE)*OVERLAP_WIDTH;
        //m_Wu += 2*OVERLAP_WIDTH;
        }
}

Referenced by Init().

---

The documentation for this class was generated from the following files:

• MucStripPlane.h
• MucStripPlane.cxx